ARS701 Hydraulic Puller

The ARS701 offers 40,500 lbf (180 kN) of pulling force respectively and is designed for stringing one rope up to 15/16 inch (24 mm) in diameter. The bull-wheel grooves on the ARS701 are made from heat treated steel.

Part Number: 21001505
DOT: 21034650

ARS701 Hydraulic Puller
ARS701 Hydraulic Puller with 3 RW23 Reel Winders
ARS701 Hydraulic Pullers with RW23 Reel Winders
ARS701 Hydraulic Puller connected to RW23 Reel Winder
ARS701 Hydraulic Puller
ARS701 Hydraulic Puller
Pulling Rope Clamp - ARS701 Hydraulic Puller
Negative Brake - ARS701 Hydraulic Puller
Controls - ARS701 Hydraulic Puller
Hydraulic Tool Circuit - ARS701 Hydraulic Puller
Pintle Hitch - ARS701 Hydraulic Puller

Specifications

Performance
Max pull 40,500 lbf (180 kN)
Speed at max pull 1.4 mph (2.2 km/h)
Max speed 3.1 mph (5 km/h)
Pull at max speed 18,000 lbf (80 kN)
Note: the basic machine performance is calculated at 68°F (20°C) and at sea level
Characteristics
Bull-wheel diameter 23 5/8 in (600 mm)
Max rope diameter 15/16 in (24 mm)
Weight 13,228 lbs (6000 kg)

Engine
Diesel 209 kW (280 hp)
Cooling system water
Electrical system 24 V
Hydraulic Transmission
Closed hydraulic circuit for stepless speed variation in both rotating directions. This machine is provided with a pull pre-setting system that maintains the pre-set pulling value (also when the speed is reduced to "0") by automatically adjusting the operation speed according to the friction and unexpected loads which may occur.
General Specifications
Net Weight 13,228 lbs (6,000 kg)
Overall Length 159 in (4,040 mm)
Overall Width 89 in (2,260 mm)
Height 108 in (2,745 mm)